MSRP: $1,175.00

The 145 degree active movement mini dome camera assembly shall be a self-contained unit that incorporates an DSP color camera, auto iris lens, direct drive pan and tilt mechanism, 2X digital zoom and RS-485, RS-422A, RS-232C communication port. The 145 active movement mini dome camera shall be a JVC Model TK-AM200U or equivalent. The TK-AM200U camera shall incorporate a 1/4" CCD interline-transfer pickup device, 380,000 (768 (H) x 494 (V)) effective pixels with built-in complementary color filter for accurate color with no image lag or distortion. The scanning system shall be 2:1 interlaced. The camera shall produce a horizontal resolution of 470 TV lines and a signal to noise ratio of 50dB with 2H-detail correction for sharp pictures. The camera shall feature an Automatic Gain Control (AGC) circuit or selectable gain levels to provide clear images in low light conditions. The camera shall deliver a usable color picture at a scene illumination of 4.0 Lux at F1.2 with 25% of video level and tinted dome cover. (1.5 Lux without Dome cover) The camera shall feature AWC or Automatic Tracking White balance for accurate color reproduction between 2,500 to 8,000K of color temperature or Manual adjustment for flexible operation in a wide range of environments. The camera shall have user-friendly on-screen set up and adjustment of IRIS level, Enhance level, ATW/Manual, AGC, L-L Phase, Digital Zoom, Camera ID and full camera function control by optional remote controller, RM-P2580U and Demo PC control software. The camera shall have modes for programmable zoning area of backlight compensation or normal lighting. The camera synchronization shall be internal and line-lock with V-phase adjustment that provides roll-free pictures during systems operation switching. The unit shall incorporate a built-in a 2.2 mm F1.0 fixed focal lens. The direct drive pan and tilt angle shall allow 145 panning and 125 tilting angle coverage. The wide range of direct drive pan and tilt angle shall allow for comprehensive coverage of the area from camera mounts on a ceiling corner. The pan and tilt direct drive motor shall be a high-speed movement allowing maximum of 120 per second of pan and tilt angle. The pan and tilt shall allow for variable and selectable speed. The camera shall have a panic alarm input terminal for selectable preset positions during alarm activation. The camera shall feature 16 preset positions that shall be programmable via the RM-P2580U or Demo PC control software. The camera shall automatically sequence through the 16 preset positions in logical programming order on Auto Patrol Mode. The pan and tilt shall feature automatic panning. The automatic panning limits vary with a digital zoom ratio. The TK-AM200U is fully compatible with TK-C553U and TK-C675BU, which can be easily mixed in a system. The dome assembly shall be included a ceiling mount bracket and terminal board. The RS-422A or RS-485 control data shall be transmitted up to 4,000 feet allows both point to point and multi-drop control of cameras from a single controller for easy installation. Also, RS-232C is available. Power source shall be AC 24V (50/60Hz). The camera's dimensions shall not exceed 4-3/8" (diameter of dome cover) x 5-3/8" (H. without terminal block). The unit shall be UL listed.