MSRP: $2,335.00

The Day and Night, self-selecting Color or Infrared CCD cameras shall be a JVC TK-N1100U or equivalent. The TK-N1100U camera shall incorporate both 1/3" color and B/W CCD interline-transfer pickup devices, 380,000 (768 (H) x 494 (V)) effective pixels for accurate color with no image lag or distortion. The camera will display black and white images down to 0 Lux under infrared illumination. The scanning system shall be 2:1 interlaced. The camera shall have an evaporation filter with bonded color and B/W CCD and reflects IR light to B/W CCD sensor. The Color and IR modes are automatically triggered when the video signal drops to a pre-determined level. The camera shall produce a horizontal resolution of 470 TV lines and a signal to noise ratio of 50dB. The camera shall feature an Automatic Gain Control (AGC) circuit to provide clear images in low light conditions. The camera shall deliver a usable picture at a scene illumination of 2.0 Lux at F1.2 in color and 0 Lux with IR illumination in B/W. The camera shall have built-in/ removable IR illumination light that covers 9.8ft distance from camera. The camera shall feature Automatic Tracking White balance for accurate color reproduction or Manual adjustment for flexible operation in a wide range of environments. The camera shall have manual set up and adjustment of Shutter speed, H-phase and Sub carrier phases. The camera shall have backlight compensation and normal lighting modes. The camera synchronization shall be internal, external and line-lock with V-phase adjustment that provides roll-free pictures during systems operation switching. The camera lens mount configuration shall accept C mount lens with less than 5.55 mm of distance "L" (see diagram and recommended lens list available), as well as both DC and video control voltage for ALC servo lenses. The camera will feature Automatic Electronic Shutter (AES) which is equivalent to continuous variable shutter speed between 1/60 to 1/100.000 second and allows for the use of both fixed and manual iris lenses. Power source shall be AC 24V (60Hz) / DC 12V. The camera's dimensions shall not exceed 4-1/16"H (with IR illuminator and without base) x 2-13/16" W x 7-1/4" D. The unit shall be UL listed.