HWMVN-C6
7-INCH OUTDOOR WALL MOUNT HOUSING
MSRP: $595.00
Product Details
Sales & Support
Documentation & Visuals
ARCHIVED
BID SPECIFICATIONS
- The
outdoor dome camera housing shall be a JVC HWMVNC-6 & HPMVNC-6
or equivalent. The housing shall be designed for the VNC655U,
VNC625U and TKC-625U cameras. The HWMVNC-6 should come standard with
an integrated wall mount. The HPMVNC-6 will come standard with a
pendant mount coupling, 1 ½” npt threads. The both
products shall also be equipped with 24 VAC input blowers and
thermostatically controlled heaters. The products housing shall be
manufactured from a high-impact engineered plastic, UV protected,
with a UL flame rating of 94V0. The dome shall be made of an
injection molded, optically clear, polycarbonate material. The dome
shall be held in place with minimum of (3) fasteners, and a safety
cable shall be provided to hold the dome while servicing. Access to
the enclosure shall be from below with (3) captive fasteners used to
press the dome against a sealing O-ring. A twist-off feature shall
allow for the final removal of the dome. All incoming wires will
enter through the back of the wall mount and run up into the
housing. An access door located at the bottom of the wall mount
will allow for easy hook up of all incoming wire connections. On
pendant models, the wiring will enter through the top of the
housing. The engineered plastic top, with its reflective white
paint, insulates internal equipment.
- The blower shall draw
1.4W continuous power. The 27W heater shall turn on at 40°F and
turn off at 60°F. The housing shall support a temperature range
of -30° to 120°F.
-