ARCHIVED
SPECIFICATIONS
KY-950BU Color video camera
Optical system: f/1.4 3-tube R/G/B prism
system (with quartz filter)
Focusing/deflection system: Electromagnetic focusing,
electromagnetic deflection
Pick-up tubes: 2/3" LOC diode gun
Plumbicon* (XQ3427) x 3
Encoder: NTSC; IQ encoder
Synchronizing system
Internal: Built-in SSG
External: VBS or BB
Lens mount: Bayonet
Sensitivity (typical): f/4.5 at 2000 lux, 89.9%
reflectance
Minimum illumination (typical): f/1.7, 38 lux (3.6 fc)
(+18 dB ON, 89.9% reflec-
tance)
S/N (typical): NTSC; 59 dB (contour
correction OFF, gamma 1,
bandwidth 4.2 MHz, Matrix
OFF, I/Q OFF).
Horizontal resolution: 700 lines (G CH center)
Registration
Zone 1: Within 0.05% (circle 80% of
picture height)
Zone 2: Within 0.1% (circle of picture
width)
Zone 3: Within 0.3% (area outside
Zone 2)
Geometric distortion
Zone 1. 2: Within 1%,
Zone 3: Within 2%
Contour correction
Horizontal: Dual-edges
Vertical: 2H, with comb filter
Color bar generator: NTSC; Split bar (100% white)/
full field (75% white)
switchable.
Optical filter: Closed, 3200 K, 5600 K,
5600 K + 25% ND
Gain boost: 0 dB, +9 dB, +18 dB
Variable blanking
H: NTSC; 10.6 us/10.8 us/10.9
us switchable.
V: NTSC; 18H/19H/20H switchable.
Input signals
Return video signal (VBS): 1.0 Vp-p, 75 ohms
Genlock signal: VBS (1.0 Vp-p, 75 ohms) or
BB (0.45 Vp-p, 75 ohms)
Microphone signal: -52 dBm, 600 ohms, balanced
Output signals
Composite video signal (VBS): 1.0 Vp-p, x 2 (BNC/14-pin
connector)
Test signals (VS or VBS): R, G, B, -G, ENC
Audio signal: -52 dBm, 600 ohms balanced/
-20 dB, unbalanced or
balanced (switchable)
Audio monitor signal: 8 ohms, -20 dB
VCR control signal: Contact or 4 V supply
(switchable)
Power supply: +12 V DC (10.5 to 17 V)
Power consumption: 1.95 A
Ambient temperature: -20 to +50 degrees C (-4
to +122 degrees F)
Weight: 4.5 kg (9.9 lbs)
Dimensions: 115(W) x 271.5(H) x 299(D)
mm (4-91/6" x 10-3/4" x
11-13/16")
Standard accessories: Tripod base, chest rest, mic
holder, registration pattern,
shoulder strap, extension
board, board extractor, dust
cover, backup battery, bias
lamp, 2 fuses (3.15 A)
*Registered trademark of N.V. PHILIPS
VF-P915U 1.5" Viewfinder
CRT: 38 mm (1.5 inch) diagonal
Resolution: 400 lines
Input signal: Luminance signal, 1.0
Vp-p, high impedance
Provided circuits: Top tally lamp (with ON/OFF
switch),
VCR/camera battery warning,
REC/tally indicator,
high-gain indicator,
VCR tape run/tape end indicator,
peaking ON/OFF switch
Diopter correction: Provided
Position adjustment: Provided (horizontal, vertical,
fron/rear)
Power supply: +12 V DC
Power consumption: 300 mA
Ambient temperature: -20 to 50 degrees C (-4 to
+122 degrees F)
Weight: 860 g (1.9 lb)
Dimensions: (6-15/16" x 2-5/8" x
7-1/8")
* * * * *