| Description: |
20" multi-format HDTV/SDTV LCD display monitor |
| Color system: |
50Hz & 60Hz, PAL & NTSC |
| Screen Size: |
20" diagonal
Effective screen size (W x H): 43.34 x 27.09 cm |
| Aspect Ratio: |
16:10. Image @ 1680 x 945 and UMD @ 1680 x 105 |
| LCD Panel: |
20" diagonal, active matrix TFT |
| No of pixels: |
Pixel array: 1680 x 1050 (W-SXGA+) |
| Display Colors: |
16.7 million |
| Viewing Angle: |
Horizontal: 170°
Vertical: 170° |
| Brightness: |
400cd/m² |
| Contrast Ratio: |
800:1 (typical) |
| Response Time: |
8 msec |
| Scan Frequency: |
Horizontal/Vertical Frequency (PC signals):
H: 31.469 kHz - 75.000 kHz
V: 60 Hz ± 5Hz
Depending on the signal within the range of these frequencies, signals may not be displayed. In this case, "Out of range" is shown. |
| Applicable Standard: |
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M |
| Audio output: |
Internal: 1.0 W + 1.0 W (L/R) |
| Input/Output Terminals: |
:- |
| VIDEO |
VIDEO 1 & VIDEO 2:
Composite video signal input/output: 1 line, BNC x 2, 1 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection (auto termination))
DVI-D (HDCP):
DVI connector x 1 (compatible with DDC2B)
COMPO./RGB (G/Y, B/Pb/B-Y, R/Pr/R-Y):
Analogue component signal/analogue RGB signal input/output: 1 line, BNC x 6
Video signal: G/Y: 1 V (p-p), 75 ohms (sync signal included)
B/Pb/B-Y, R/Pr/R-Y: 0.7 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection (auto termination))
EXT. SYNC (CS):
Composite sync signal input/output: 1 line, BNC x 2, 0.3V (p-p) to 4V (p-p), 75 ohms (bi-polar tri-signal, negative pole binary signals, BB) (video signals excluded)
(IN and OUT are connected with a bridge connection (auto termination))
HD/SD SDI (IN 1) and (IN 2):
Digital signal input (compatible with EMBEDDED AUDIO):
Auto detection, 1 line, BNC x 1
HD/SD SDI (SWITCHED OUT):
Digital signal output (compatible with EMBEDDED AUDIO):
1 line (switched out), BNC x 1 |
| AUDIO: |
AUDIO ASSIGN (IN 1):
Analog audio signal input: 1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (IN 1):
Analog audio signal input: 1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT):
Analog audio signal output: 1 line, RCA x 2, 500 mV (rms) |
| External Control: |
MAKE/TRIGGER: RJ-45 x 1 (8-pin)
RS-485: RJ-45 x 2 (IN/OUT) (8-pin)
RS-232C: D-sub (9-pin) x 1 |
| Power consumption: |
Rated current: 1.20 A |
| Power requirement: |
AC 120/220 to 240V, 50Hz/60Hz |
| Operating Temperature: |
5°C to 35°C |
| Operating Humidity: |
20% to 80% (non-condensing) |
| Dimensions (WxHxD): |
477 x 354 x 99 mm with stand
477 x 394.6 x 243 mm with stand (low position)
(Excluding protrusions) |
| Weight: |
7.4 kg (excluding stand)
10.3 kg (including stand) |
| ACCESSORIES (Supplied) |
AC power cord
Stand
Power cord holder |
| ACCESSORIES (Optional) |
RK-C20L1 EIA Rack mount adapter
TS-W20F1 Protection filter |
