Product Details
Sales & Support
Documentation & Visuals
|
Digital Video, Camera to Base |
|
|
Number of Channels |
1 Per Camera |
|
Interface |
SMPTE ST259, ST292, ST424 |
|
Data Rate |
270Mbps, 1.5Gbps, 3Gbps |
|
Input/Output Level |
800mVp-p |
|
Input/Output Impedance |
75 Ohms |
|
Number of Outputs at Base |
2 Per Camera |
|
Digital Video, Base to Camera |
|
|
Number of Channels |
3 Per Camera |
|
Interface |
SMPTE ST259, ST292, ST424, HDMI** |
|
Data Rate |
270Mbps, 1.5Gbps, 3Gbps |
|
Input/Output Level |
800mVp-p |
|
Input/Output Impedance |
75 Ohms |
|
Connectors |
BNC, HDMI*** |
|
**HDMI camera output
is only available on Return channel #3 for prompter use,
only SMPTE compatible resolutions are supported. All
inputs at base unit are SDI. |
|
|
Video, Genlock |
|
|
Number of Inputs |
1 + Loop Output |
|
Type |
Analog Black Burst, Tri-Level |
|
Impedance |
75 Ohms |
|
Connector, Camera Unit |
Internal |
|
Connector, Base Unit |
BNC (x2) |
|
Audio, Camera to Base |
|
|
Type |
Embedded in Camera’s SDI video |
|
Number of Channels |
Max supported by camera |
|
Audio, Base to Camera |
|
|
Number of Channels |
2 |
|
Type |
Balanced Analog Line-Level, mono |
|
Level |
+4dBu nominal, +24dBu max. |
|
Connector, Camera Unit |
DB9 |
|
Connector, Base Unit |
DB25 |
|
Intercom |
|
|
Number of Channels |
2 |
|
Interface |
2-Wire or 4-Wire |
|
Compatibility |
RTS, Clear-Com |
|
Connector, Camera Unit |
XLR-5 |
|
Headset MIC Type |
Dynamic |
|
Headset MIC Impedance |
200 Ohms nominal |
|
Connector, Base Unit |
DB25 |
|
RCP Camera Control (Remote) |
|
|
Number of Channels |
1 Per Camera |
|
Connector, Camera Unit |
Internal |
|
Connector, Base Unit |
6 pin Mini-DIN (x3) |
|
Ethernet |
|
|
Number of Channels |
1 Per Camera |
|
Data Rate |
10/100/1000 Base-T |
|
Connector, Camera Unit |
RJ45 Cat5e |
|
Connector, Base Unit |
RJ45 Cat5e (x3) |
|
Timecode |
|
|
Number, Base to Camera |
1 per Camera |
|
Number, Camera to Base |
1, from Camera # 1 only |
|
Inputs |
Unbalanced, 15Vp-p max |
|
Outputs |
Unbalanced, 3Vp-p |
|
Connector, Camera Unit |
Internal |
|
Connector, Base Unit |
BNC |
|
Tally/GPIO |
|
|
Number, Base to Camera |
3 per Camera (Red, Green, Spare) |
|
Number, Camera to Base |
1 Per Camera |
|
Inputs |
Short to GND or TTL Low to Activate |
|
Outputs |
Relay Contact Closure (30V, 2A max) |
|
Connector, Camera Unit |
DB15 |
|
Connector, Base Unit |
DB25 |
|
Electro-Optical |
|
|
Operating Wavelengths |
1471-1611nm |
|
Tx Laser Output Power |
0dBm (Class 1 Laser) |
|
Receiver Sensitivity |
-20dBm |
|
Fiber Compatibility |
Single-mode |
|
Optical Connector Types |
SMPTE 304M |
|
Mechanical/Environmental |
|
|
Dimensions (HxWxD) |
|
|
Camera Unit |
8.2” x 6.7” x 4.2” |
|
Base Unit |
3.5” x 19” x 16” (2RU) |
|
Environmental |
0 to 50°C, 0 to 95% RH, non-condensing. |
|
Power Input, Base |
IEC320, Universal Input, 90-250VAC, 50-60Hz |
|
Power Input, Camera |
|
|
Remote Power |
Hybrid Fiber Connector |
|
Local Power |
Battery Mount ((Anton Bauer or (Optional) V-Mount)) |
