BR-D92E

4 CHANNEL D-9 EDITING RECORDER (PAL)

MSRP: $26,316.00
ARCHIVED
[GENERAL]
Format: D-9
Tape: 1/2-inch metal particle
Power requirement: AC 120 V, 60 Hz (BR-D92U)/AC 220 to 240 V, 50/60 Hz (BR-D92E)
Power consumption: 180 W
Dimensions (WHD): 429 x 188 x 567 mm (16-15/16" x 7-7/16" x 22-3/8")
Weight: Lighter than 25 kg (55.1 lbs.)
Temperature: Operating: 5 degrees C to 40 degrees C (41 degreesF to 104 degreesF)
Storage: -20 degrees C to 60 degrees C (-4 degreesF to 140 degreesF)
Humidity: 30% to 80%
Tape speed: 57.737 mm/s
Recording time: 124 minutes (using DS-124 tape)
Picture search: +-32 times with visible color picture (forward & reverse)
FF/REW time: Approx. 3 minutes (with DS-104 tape)
Slow motion: +-1/3 times with full picture quality (requires remote control)
Remote control: RS-422A
Remote diagnosis: Via RS-232C (list capabilities)
Rotation speed: 4500 rpm
Tracks: 2 audio cue, 1 control, 10 tracks video/audio per frame (NTSC), 12 tracks (PAL)
Track pitch: 20 um
Head drum: 62 mm (same as S-VHS)

[VIDEO]

Sampling: 4:2:2, 8-bit Y: 13.5 MHz R-Y/B-Y: 6.75 MHz
Compression: 3.3:1 DCT based intraframe coding
Data rate: 50 Mbps
Frequency response (SDI in, analog out): Y: 0 to 5.75 MHz, +0.5/-2.0 dB (analog out)
R-Y/B-Y: 0 to 2 MHz, +-1.0 dBY: 0 to 2 MHz, +-1.0 dB
S/N (SDI in analog out): 55 dB
K factor: 2%
Pre-read window: 5H
SDI I/O (unbalanced): Option w/embedded audio
Analog I/O (75 ohms, unbalanced): Composite: 1 Vp-p
Component: Y: 1 Vp-p R-Y/B-Y: 0.7 Vp-p
Y/C: Not available
Reference: 0.45 Vp-p (loop)


[VIDEO CONTROL ADJUSTMENT RANGE]

System sync phase: +-3 us or more
Subcarrier phase: 360 degrees or more
Video phase: +-1 us or more
Video level: +-3 dB or more
Chroma level: +-3 dB or more
Chroma phase: +-30 degrees or more
Setup level: 0 mV or less to 100 mV


[AUDIO]

System: 4 ch PCM, 48 kHz, 16-bit
Frequency response: 20 Hz to 20 kHz +1/-1.5 dB
Dynamic range: Less than 85 dB (at 1 kHz)
Distortion ratio: Less than 0.1% (1 kHz at operation level)
Crosstalk: Less than 75 dB (at 1 kHz)
Headroom: 20 dB
Emphasis: Automatically switching in play
Wow and flutter: Below measurable level
SDI I/O: Option (embedded)
Analog input: Line: -6/+4 dB high impedance balanced
Analog output: Line: -6/+4 dB low impedance balanced
Monitor: -6 dB low impedance balanced
Headphones: Infinity to -17 dBs, 8 ohms