BR-DV600U

PROFESSIONAL DV RECORDER/PLAYER

MSRP: $2,995.00
ARCHIVED

BR-DV600U SPECIFICATIONS

General  
Power requirements: AC 120 V, 50/60 Hz, DC 12 V (11 V to 17 V)
Power consumption: Approx. 35 W
Dimensions: 215 (W) x 88 (H) x 324.5 (D) mm (8-1/2" x 3-1/2" x 12-13/16')
Weight: Approx. 4 kg (8.8 lbs.)
Temperature Operating: SIC to 40'C (41 IF to 104'F)
Storage: -20'C to 60'C (-4,F to 140'F)
 
Humidity   Operating: 30% to 80% RH
Storage: 85% RH or less
Format: DV format
Signal format: NTSC
Usable tape: Mini DV tape
Tape width: 6.35 mm
Tape speed: 18.8 mm/sec. (SP mode)
Record/play time: 60 minutes (with an MDV-60 tape)
FF/rewind time:  Within 120 sec. (with an MDV-60 tape)
[Video]  
Video signal recording format: 8-bit, 13.5 MHz, 4:1:1 component recording
Sampling frequency: Y: 13.5 MHz, R-Y/B-Y: 3.375 MHz
Video inputs Analog composite: 1.0 Vp-p, 75 ohms  
Analog Y/C: Y: 1.0 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms
Analog component: Y: 1.0 Vp-p, 75 ohms, R-Y/B-Y: 0.7 Vp-p, 75 ohms
External sync input: 0.286 Vp-p, 75 ohms
Video output Analog composite: 1.0 Vp-p, 75 ohms  
Analog Y/C: Y: 1.0 Vp-p, 75 ohms, C: 0.286 Vp-p, 75 ohms
Analog component: Y: 1.0 Vp-p, 75 ohms R-Y/B-Y: 0.7 Vp-p, 75 ohms
[Audio]  
Audio signal recording format: 16-bit, 48 kHz for two channels or 12-bit, 32 kHz PCM for four channels
Frequency response: 20 Hz to 20 kHz, +1.0/-5 dB (I 6 bits)
Dynamic range: 85 dB or more (PCM audio)
Audio input Line: -6 dB, high impedance, unbalanced
Mic: -50 dB, high impedance, unbalanced
Audio output Line: -6 dB, low impedance, unbalanced
Monitor: -6 dB, low impedance, unbalanced
Headphone: - infinity to -17 dBs, 8 ohms
Time code Output: 0 ± 3 dBs, low impedance, balanced
[Connectors] IEEE 1394 interface: 4-pin
RS-422 interface: D-sub 9-pin
JVC bus connector: DIN 12-pin
Accessories Instruction manual x 1
AC cable x I
Options RM-G30U remote control unit
SA-K46U RS-232C interface board

Facebook Twitter LinkedIn Instagram YouTube