ARCHIVED

 
                      RM-P200U SPECIFICATIONS

Output signals                   
  Composite video signal         : 1Vp-p. 75 ohm x 2
  R/G/B signals                  : 0.7Vp.p. 75 ohm  x 1 each 
                                   (without SYNC)
  Y/R-Y/B-Y signals
          Y                      : 1 Vp-p
        R-Y                      : 0.486Vp-p
        B-Y                      : 0.486Vp-p. 75 ohm each
                                 
   Y/C 358 signals 
           Y                     : 1Vp-p. 75 ohm
           C                     : 0.286Vp-p, 75ohm (burst level)
                                 
Intercom signal                  : Two-wire system. 
                                   -10dB. 600a balanced 

(R/G/B, Y/R-Y/B-Y Y/C 358 should be selecled at camera head. The 
primariy output is R/G/B.) 

Input signals                   

  Genlock signal                  : Composite video signal 1Vp-p. 
                                    75 ohm  or high
                                    Black burst signal 0.43Vp-p. 75 ohm  
                                    or high
  AUX signal                      : Composite video signal 1Vp-p. 
                                    75 ohm  or high
  Intercom signal                 : Two-wire system. -10dB. 600 ohm  
                                    balanced
  Tally signal                    : Make-contact or power 
                                    (5-24V DC or 6V AC) supply
Power supply                      : 120V AC. 60Hz
Ambient temperature               : -10'C to +45'C (14'F to 113'F) 
Power consumption                 : 11W, 65W (with camera and 4" 
                                    viewfinder)
Weight                            : 5.0kg (11.1 Ibs.)

Design and specifications subject to change without notice.