DT-V24G1Z SPECIFICATIONS

Type

Multi format LCD monitor

Screen Size

Type 24 wide format

Aspect Ratio

16:10

LCD Panel

24" wide,active matrix TFT

Effective Screen Size (W x H)

518.4 x 324 mm (20-1/2" x 12-7/8")

Pixels

1920 x 1200

Display Colors

16.77 million

Viewing Angle

Horizontal

178°

Vertical

178°

Brightness

400 cd/m²

Contrast Ratio

1000: 1

Response Time
(G to G)

5 ms (TYP)

H/V Frequency
(PC signals)

Horizontal
Vertical

31.469 kHz to 75.000 kHz
48 Hz - 65 Hz
Depending on the signal within the range of these frequencies, some signals may not be displayable in which case, "Out of range " is shown.

Applicable Standard

3G SDI (Ready) : SMPTE424M/SMPTE425M

DUAL LINK HD SDI: SMPTE372M

HD SDI: BTA S-004C, SMPTE292M

SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525

EMBEDDED AUDIO: SMPTE299M, SMPTE272M

Audio Output

Internal speaker: 1.0 W + 1.0 W

Operating Conditions

Operating temperature

5°C to 35°C (41°F to 95°F)

Operating humidity

20% to 80% (non condensing)

Storage temperature

-20°C to 60°C

Power Requirements

AC 120/220-240 V, 50/60 Hz

Rated Current

1.15 A (AC 120 V) / 0.67 A (AC 220 – 240 V)

Dimensions (WxHxD)

With desktop stand

564 x 448.6 x 243 mm (22-1/4" x 17-3/4" x 9-5/8")

excluding protrusions)

Without stand

564 x 408 x 99 mm (22-1/4" x 16-1/8" x 4")

Weight

Including stand

11.6 kg (25.5 lbs.)

Excluding stand

8.7 kg (19.1 lbs.)

Provided Accessories

AC power cord, power cord holder x 1, screw x 2 ( for power cord holder)

Input/Output Terminals

Video

VIDEO (INPUT 1)

VIDEO (INPUT 2)

Input/output of composite signal: 2 line, BNC connector x 4, 1 V(p-p), 75Ω
* The input (IN) and output (OUT) terminals are bridge connected (auto termination).

DVI-D (HDCP)

DVI-D signal input (compatible with HDCP):

DVI-D connector x 1 (compatible with DDC2B)

COMPO./RGB

(GY, B/PB/B-Y, R/PR/R-Y)

Input/output of analog component signal/analog RGB signal: 1 line, BNC connector x 6
G/Y: 1 V(p-p), 75Ω (including sync signal)
B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75Ω
* The input (IN) and output (OUT) terminals are bridge connected (auto termination)

EXT.SYNC (CS)

Input/output of composite sync signal: 1 line, BNC connector x 2,

0.3 V(p-p) – 4 V(p-p), 75Ω (tri-level sync,

negative polarity sync (bi-level), and BB) (including no video signal)

* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination)

E. AUDIO HD/SD SDI (IN 1)

E. AUDIO HD/SD SDI (IN 2)

Digital signal input (compatible with EMBEDDED AUDIO/

DUAL LINK signals): auto detection, 2 line, BNC connector x 2

E. AUDIO HD/SD SDI

(SWITCHED OUT)

Digital signal output (compatible with EMBEDDED AUDIO signals):

1 line switched out, BNC connector x 1

Audio

AUDIO ASSIGN (IN1)

Analog audio signal input:

AUDIO ASSIGN (IN2)

2 line, RCA connector x 4, 500 mV (rms), high impedance

AUDIO ASSIGN (MONITOR OUT)

Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)

External Control

REMOTE (MAKE/TRIGGER)

RJ-45 x1 (8-pin)

REMOTE (RS-485)

RJ-45 x2 (IN/OUT) (8-pin)

REMOTE (RS-232C)

D-sub(9-pin) x1