VR-D1016-1TB

16 CHANNEL DIGITAL VIDEO RECORDER w/1TB HDD

MSRP: $640.00
ARCHIVED

Compression

  • PAL/NTSC adaptive video inputs.
  • H.264 video compression with high reliability and superior definition.
  • Each channel supports dual-stream.
  • Main stream supports encoding at up to WD1 resolution in real time and sub stream at CIF/QCIF resolution.
  • Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.
  • The quality of the input and output video is configurable.
  • Normal and event recording parameters configurable for per individual camera.
  • Encoding for both audio/video composite stream and video stream; audio and video synchronization during composite stream encoding.
  • Watermark technology.

Local Monitoring

  • Simultaneous HDMI, VGA and CVBS outputs.
  • HDMI/VGA output at up to 19201080P resolution.
  • 1/4/6/8/9/16-division live view is supported, and the display sequence of screens is adjustable.
  • Live view screen can be switched in group, and manual switch and automatic cycle review is also provided, the interval of automatic cycle can be adjusted.
  • Quick setting menu is provided for live view.
  • The selected live view channel can be shielded.
  • Motion detection, tamper-proof, video exception and video loss alarm functions.
  • Privacy mask.
  • Several PTZ protocols supported; PTZ preset, patrol and pattern.
  • Zooming in by clicking the mouse and PTZ tracing by dragging mouse.

HDD Management

  • 2 SATA hard disks can be connected to the VR-D1016-1TB (a single 1TB drive is provided), with a maximum of 4TB storage capacity for each disk.
  • 8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.
  • HDD group management.
  • Support HDD standby function.
  • HDD property: redundancy, read-only, read/write (R/W).
  • HDD quota management; different capacity can be assigned to different channel.

Recording, Capture and Playback

  • Holiday recording schedule configuration.
  • Normal and event video encoding parameters.
  • Multiple recording types: manual, normal, and motion.
  • 8 recording time periods with separated recording types.
  • Pre-record and post-record for motion detection for recording, and pre-record time for schedule and manual recording.
  • Searching record files by event.
  • Customization of tags, searching and playing back by tags.
  • Locking and unlocking record files.
  • Local redundant recording.
  • Searching and playing back record files by channel number, recording type, start time, end time, etc.
  • Smart search for the selected area in the video.
  • Zooming in when playback.
  • Playing reversely.
  • Supports pause, speed up, speed down, skip forward, and skip backward when playback, locating by dragging the mouse.
  • Up to 16-ch synchronous playback.

Backup

  • Export video data by USB or SATA storage device.
  • Export video clips when playback.
  • Management and maintenance of backup devices.

Alarm and Exception

  • Alarm for video loss, motion detection, tampering, abnormal signal, video input/output standard mismatch, illegal login, network disconnected, IP confliction, abnormal record, HDD error, and HDD full, etc.
  • Alarm event triggers full screen monitoring, audio alarm, notifying surveillance center and sending email.
  • Automatic restore when system is abnormal.

Other Local Functions

  • Operable by mouse, or IR remote control.
  • Three-level user management; admin user is allowed to create many operating accounts and define their operating permission, which includes the limit to access any channel.
  • Operation, exceptions and log recording and searching.
  • Import and export of device configuration information.

Network Functions

  • 1 self-adaptive 10M/100M network interface.
  • IPv6 is supported.
  • TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, UPnP™, NFS, and iSCSI are supported.
  • TCP, UDP and RTP for unicast.
  • Remote search, playback, download, locking and unlocking the record files, and downloading files broken transfer resume.
  • Remote parameters setup; remote import/export of device parameters.
  • Remote viewing of the device status, system logs and alarm status.
  • Remote locking and unlocking of control panel and mouse.
  • Remote HDD formatting and program upgrading.
  • Remote system restart.
  • RS-485 transparent channel transmission.
  • Alarm event and exception information can be sent to the remote host.
  • Remotely start/stop recording.
  • Upgrade by remote FTP server.
  • Remote PTZ control.
  • Two-way audio and voice broadcasting.
  • Embedded WEB server.

Development Scalability:

  • SDK for Windows and Linux system.
  • Source code of application software for demo.
  • Development support and training for application system.