The DT-G series offer JVC's latest studio monitor technology, now compatible with 4K/Ultra HD signals. The monitors have zero latency, built-in 3D LUT auto calibration and can be controlled via a web browser.

Full HD LCD panels

DT-G series studio monitors adopt 17.3" / 21.5" / 23.8" / 27" 1920×1080 pixel full HD resolution LCD panels with LED backlighting.

Supports 4K-HDMI and 3G-SDI

DT-G series monitors support up to 4K60p HDMI, which can be downsample to FHD display, and support 3G-SDI (SMPTE 425M) including Level A&B; 2K-SDI (2048x1080p) can also downsample to FHD display.

New zero latency mode

Almost zero latency* available via a special image processing mode for lip-sync monitoring. *Only a few lines' delay, please note that in this mode, no picture correction is possible.

Selectable gamma preset

Support gamma preset selection from: 1.8, 2.2, 2.4 and 2.6.

Waveform/Vector/Histogram

Support waveform selection display (Y, Cb, Cr, R, G, B), and single lines selection mode; support vector scope and R/G/B/Y histogram display, with multiple display position, size and color selection.

16-ch audio level meters with alert and output selection

Support de-embed audio from SDI and HDMI, and display 16-ch audio level meters, with audio abnormal alerts info displayed on each audio bar. You can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translu- cent of the audio meter pattern are selectable.

Webserver IP remote control

Connect the monitor in LAN and read the monitor status or set menu by computer web browser, which enables studio administrators to control all the monitors remotely.

TSL UMD and User editable video title

Support UMD controlling input via RS485 port, compatible with TSL 3.1 and 4.0 UMD protocol. Users can also edit a fixed video title for the monitor, and the UMD/title letter size, color, background are selectable.

On-screen TALLY display

Display on-screen TALLY signals of Red / Green / Yellow colours, and the on-screen TALLY display position up/down, blinking on/off are selectable.

USB firmware upgradable

The rear USB port is for firmware upgrade. Users can download firmware to a USB stick, and operate monitor menu to upgrade, without PC or other adaptors.

Other features

• 10-bit processing
• SDI Timecode (LTC, VITC1&2) display
• AFD (Active Format Description) info display
• Frame/Field view selection
• R/G/B/Mono, False color, Zebra stripes display
• Focus assist display mode
• H/V delay, freeze frame display mode
• Safety area selection: 80%, 85%, 90%, 93%, 95%
• Scale marker: 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1
• Native scan, over scan and normal scan selection
• GPI control via RS485 port connection
• 3 User setting data storage
• 6 User definable function keys
• AntonBauer battery plate for field application (V-mount plate in an option)
• Rack mount included on DT-G17U