TK-C675BU

360 DEGREE PROGRAMMABLE SPEED DOME CAMERA

MSRP: $1,480.00
ARCHIVED
ARCHITECTS' AND ENGINEERS' BID SPECIFICATION

The 360 degree endless speed dome camera assembly shall be a self-contained unit that incorporates a color camera, motorized zoom/auto iris lens, pan and tilt aluminum diecast mechanism and RS-485, RS-422A communication port. The 360 endless speed dome camera shall be a JVC Model TK-C675BU or equivalent. The TK-C675BU camera shall incorporate a 1/3" CCD interline-transfer pickup device, 380,000 (771 (H) x 492 (V)) effective pixels with built-in complementary color filter for accurate color with no image lag or distortion. The scanning system shall be 2:1 interlaced. The camera shall produce a horizontal resolution of 470 TV lines and a signal to noise ratio of 48dB. The camera shall feature an Automatic Gain Control (AGC) circuit or selectable gain levels to provide clear images in low light conditions. The camera shall deliver a usable color picture at a scene illumination of 3.0 Lux at F1.2 with 25% of video level. The camera shall feature Automatic Tracking White balance for accurate color reproduction or Manual adjustment for flexible operation in a wide range of environment. The camera shall have user-friendly on-screen set up and adjustment of IRIS level, Enhance level, ATW/Manual, AGC, L-L Phase, Lens controls, Camera ID and full function control by optional remote controller, RM-P2580U and Demo PC control software. The camera shall have modes for programmable zoning area of backlight compensation or normal lighting. The camera synchronization shall be internal and line-lock with V-phase adjustment that provides roll-free pictures during systems operation switching. The unit shall incorporate a built-in 16X optical zoom lens that has 4.5 mm to 72 mm of zoom ratio with up to 2 seconds of zooming speed, 1 second of focus speed and F1.2 to F272 iris range. The pan and tilt shall be allows seamless 360 panning and 90 tilting angle coverage with 180 auto flip feature. The wide range of pan and tilt angle shall allow for comprehensive coverage of the area. The pan and tilt aluminum diecast mechanism shall be a high-speed movement allowing maximum of 240 per second of panning speed and 120 per second of tilting speed. The pan and tilt shall allow for variable and selectable speed. The camera shall feature 64 preset positions that shall be programmable via the RM-P2580U or Demo PC control software. The camera shall automatically sequence through the 64 preset positions in logical programming order on Auto Patrol Mode. The pan and tilt shall feature programmable automatic panning. The panning limits shall be varying with the zoom ratio. The TK-C675BU is fully compatible with TK-C553U and TK-AM200U, which can be easily mixed in a system. The dome assembly shall be provided with a ceiling mount bracket and terminal board. The RS-422A or RS-485 control data shall be transmitted up to 4,000 feet allows both point to point and multi-drop control of cameras from a single controller for easy installation. Power source shall be AC 24V (50/60Hz). The camera's dimensions shall not exceed 5-11/16" (diameter of dome cover) x 7-5/16" (H. without terminal block). The unit shall be UL listed.