ARCHIVED
==================BY110U SPECIFICATIONS==================
Optical system : f/1.4 three tube RGB prism
system
Focusing/deflection system : Electrostatic focus/electro-
magnetic deflection
Pickup tubes : 1/2" Saticon* (x3)
Encoder : NTSC (R-Y, B-Y)
Synchronizing system
Internal : Built-in SSG
External : Composite video or black burst
(via AC power adaptor or remote
control unit)
Lens : f/1.4 10X power zoom lens,
minimum object distance 1 m
(3.25 feet), with macro position
Sensitivity : f/2.8 at 2000 lux (186 fc)
Minimum illumination : f/1.4, 65 lux (70% video level)
(+12 dB switch ON)
S/N : 54dB (Contour correction OFF,
Gamma 1, Bandwidth 4.2 MHz)
Horizontal resolution : 600 lines (G ch center)
Registration
Zone 1 : Within 0.1% (circle 80% of
picture height)
Zone 2 : Within 0.4% (circle of picture
width)
Zone 3 : Within 0.8% (area outside Zone 2)
Geometric distortion : Within 2%
Input signals
Return video signal : VBS, 1.0 Vp-p, 75 ohms
Genlock signal : Composite video (VBS, 1.0 Vp-p,
75 ohms) or black burst (BB, 0.43
Vp-p, 75 ohms)
Microphone : -52dBm, 600 ohm unbalanced
Output signals
Composite video signal : 1.0 Vp-p, 75 ohm (14p connector)
Test signal : R, G, B, R-G, B-G, ENC
Audio signal : -20 dB unbalanced
Audio monitor signal : From video recorder used
VCR control signal : Contact or 4V supply
(switchable)
Contour Correction
Horizontal : Dual-edged
Vertical : 1H, single-edged
Optical filters : Closed, 3200K, 5600K,
5600K+25%ND
Gain Boost : 0 dB, +6 dB, +12 dB
Power requirement : +12V DC (10.5--15V), 1.05 A
Ambient temperature : -5 to +45 C (23 to 113 F)
Weight : 3.7 kg (8.2 lbs) including 1"
viewfinder
1" Viewfinder VF-110U
---------------------
CRT : 25 mm (1 inch) diagonal
Resolution : 350 TV lines
Provided circuits : Front tally lamp, video rec/
camera battery warning, record/
tally indication, video level
display.
Diopter : provided
Power requirement : 12V DC, 300 mA
Ambient temperature : -20 to +50 C (-4 to 122 F)
Weight : 400 g
Dimensions : 193(W) x 164(H) x 57(D) mm
(7-5/8" x 6-1/2" x 2-1/4")
4" Viewfinder VF-400
--------------------
CRT : (4 inches) diagonal
Resolution : more than 500 TV lines
Provided circuits : Tally lamps, peaking control
Pan/tilt mechanisms : Provided
Power requirement : 12V DC
Ambient Temperature : -20 to 50 C (-4 to 122 F)
AC Power Adaptor AA-C11U
------------------------
Power input : 120 V AC, 50/60 Hz
Output
Camera mode : +12V DC, 2.2 A
Charge mode : +12V to +16V DC, 2.2 A
Power consumption : 60 W
Compatible battery pack : DC-C11U
Ambient temperature
Camera mode : -20 to +50 C (-4 to 122 F)
Charge mode : +10 to +35 C (+50 to +95 F)
Charge indication : QUICK/TRICKLE
Charge time : Approx. 90 min. (quick charge)
Weight : 1.85 kg (4.1 lbs)
Battery Pack DC-C11U
--------------------
Type : Ni-Cad battery
Output : 12 V DC, 2.2 Ah
Overcharge sensor : Built-in
Remote Control Unit RS-110U
---------------------------
Output signals
Composite video signals : 1.0 Vp-p, 75 ohms, x 2
R/G/B signals : 0.7 Vp-p, 75 ohms, x 1 each
(by switching)
Intercom signal : 2-wire system, line -20 dBm,
600 ohm balanced
Input signals
Genlock signal : VBS 1.0 Vp-p, 75 ohm (loop-
thru output) or BB 0.43 Vp-p,
75 ohms (loop-through output)
AUX signal : VBS or VC, 1.0 Vp-p, 75 ohms,
(loop-thru output)
Intercom signal : 2-wire system, line -20 dBm,
600 ohm balanced
Tally signal : Make-contact or power supply
(5 to 24 V DC, or 6 V AC)
Power requirement : 120 V AC, 50/60 Hz
Ambient temperature : -10 to +45 C (+14 to 113 F)
Microphone M-K50U
-----------------
Type : Electret condenser
Sensitivity : -52 dB
S/N ratio : 50 dB
Frequency response : 70 to 16000 Hz
Output impedence : 600 ohms, balanced
Power requirement : 9 V DC (provided from camera)
Ambient temperature : -5 to +45 C (+23 to +113 F)
Weight : 270 g (0.6 lbs)
Design and specifications subject to change without notice.