ARCHIVED

Specifications

Image device
1/2-inch Interline Transfer CCD x 3
Scanning
Progressive
Total pixels
4.35 million (3 x 1.45 million) pixels
Effective pixels for CCD
1.45 million pixels (H: 1,392 x V: 1,040)
Output pixels
1,360 x 1,024
Optical system
Dichroic prism
Aspect ratio
4:3
Lens mount
1/2-inch C mount
Analog output
R/G/B 0.7 V(p-p) 75 ohms each
Output mode
SXGA:
1,360 x 1,024 pixels 7.5 frames/sec.
VGA:
640 x 480 pixels 60 frames/sec.
(Image refresh rate 7.5 frames/sec.)
VGA:
640 x 480 pixels 60 frames/sec.
(Image refresh rate 30 frames/sec.,
vertical resolution: 240 lines)
Output signal is selectable from above three modes
Digital output
SCSI-2 50P half-pitch SCSI connector
Sync output
Hs/Vs 3 V(p-p) (low active)
Image memory
5 frames (4 frames when selecting SXGA analog
output)
Sensitivity
ISO100 equivalent
Quantization
10 bit in 8 bit out
White balance
Auto and manual (menu)
Gain
ISO100, 200, 400 (menu)
Electric shutter
1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000, V.SCAN, EEI (menu)
Paint
Manual (menu)
Flare compensation
(Menu)
Dynamic shading
(Menu)
Operating temperature
0 40 C
Input voltage
DC12V
Power consumption
Approx. 15W
Weight
Approx. 850g (1.9 lbs.)
Dimensions (W x H x D)
70 x 80 x 150mm
2-13/16 x 3-3/16 x 5-15/16 inches
Design and specifications subject to change without notice.