Product Details
Sales & Support
Documentation & Visuals
|
Model |
|
DT-V20L3G |
|
Type |
|
Multi format LCD monitor |
|
Screen Size |
|
Type 20 wide format |
|
Aspect Ratio |
|
16:10 |
|
LCD Panel |
|
20" wide,active matrix TFT |
|
Effective Screen Size (W x H) |
|
433.4 x 270.9 mm (17-1/8" x 10-3/4") |
|
Pixels |
|
1680 x 1050 |
|
Display Colors |
|
16.77 million |
|
Viewing Angle |
Horizontal |
178° |
|
|
Vertical |
178° |
|
Brightness |
|
470 cd/m2 |
|
Contrast Ratio |
|
700: 1 |
|
Response Time (G to G) |
|
6 ms (TYP) |
|
Horizontal/Vertical |
Horizontal |
31.469 kHz to 75.000 kHz |
|
Frequency (PC signals) |
Vertical |
48 Hz - 65 Hz |
|
|
|
Depending on the signal within the range of these |
|
|
|
frequencies, some signals may not be displayable in which |
|
|
|
case, "Out of range " is shown. |
|
Applicable Standard |
|
3G SDI (Ready) : SMPTE424M/SMPTE425M |
|
|
|
DUAL LINK HD SDI: SMPTE372M |
|
|
|
HD SDI: BTA S-004C, SMPTE292M |
|
|
|
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525 |
|
|
|
EMBEDDED AUDIO: SMPTE299M, SMPTE272M |
|
Audio Output |
|
Internal speaker: 1.0 W + 1.0 W |
|
Operating Conditions |
Operating temperature |
5°C to 35°C (41°F to 95°F) |
|
|
Operating humidity |
20% to 80% (non condensing) |
|
|
Storage temperature |
-20°C to 60°C |
|
Power Requirements |
|
AC 120/220-240 V, 50/60 Hz |
|
Rated Current |
|
1.00 A (AC 120 V) / 0.60 A (AC 220 – 240 V) |
|
Dimensions (WxHxD) |
With desktop stand |
477 x 394.6 x 243 mm (18-7/8" x 15-5/8" x 9-5/8") |
|
(excluding protrusions) |
Without stand |
477 x 354 x 99 mm (18-7/8" x 14" x 4") |
|
Weight |
Including stand |
10.6 kg (23.3 lbs.) |
|
|
Excluding stand |
7.7 kg (16.9 lbs.) |
|
Provided Accessories |
|
AC power cord, power cord holder x 1, |
|
|
|
screw x 2 ( for power cord holder) |
|
INPUT/OUTPUT TERMINALS |
||
|
Video |
VIDEO (INPUT 1) |
Input/output of composite signal: |
|
|
2 line, BNC connector x 4, 1 V(p-p), 75 ? |
|
|
VIDEO (INPUT 2) |
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination). |
|
|
DVI-D (HDCP) |
DVI-D signal input (compatible with HDCP): |
|
|
|
DVI-D connector x 1 (compatible with DDC2B) |
|
|
COMPO./RGB |
Input/output of analog component signal/analog RGB signal: |
|
|
(GY, B/PB/B-Y, R/PR/R-Y) |
1 line, BNC connector x 6 |
|
|
|
G/Y: 1 V(p-p), 75 ? (including sync signal) |
|
|
|
B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75 ? |
|
|
|
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) |
|
|
EXT.SYNC (CS) |
Input/output of composite sync signal: 1 line, BNC connector x 2, |
|
|
|
0.3 V(p-p) – 4 V(p-p), 75 ? (tri-level sync, |
|
|
|
negative polarity sync (bi-level), and BB) (including no video signal) |
|
|
|
* The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) |
|
|
Audio |
E. AUDIO HD/SD SDI (IN 1) |
Digital signal input (compatible with EMBEDDED AUDIO/ |
|
E. AUDIO HD/SD SDI (IN 2) |
DUAL LINK signals): auto detection, 2 line, BNC connector x 2 |
|
|
E. AUDIO HD/SD SDI |
Digital signal output (compatible with EMBEDDED AUDIO signals): |
|
|
(SWITCHED OUT) |
1 line switched out, BNC connector x 1 |
|
|
AUDIO ASSIGN (IN1) |
Analog audio signal input: |
|
|
AUDIO ASSIGN (IN2) |
2 line, RCA connector x 4, 500 mV (rms), high impedance |
|
|
AUDIO ASSIGN (MONITOR OUT) |
Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms) |
|
|
External Control |
REMOTE (MAKE/TRIGGER) |
RJ-45 x1 (8-pin) |
|
REMOTE (RS-485) |
RJ-45 x2 (IN/OUT) (8-pin) |
|
|
REMOTE (RS-232C) |
D-sub(9-pin) x1 |
|
