ARCHIVED

GENERAL

Power

DC 12V (11-17V)

Power consumption

Approx. 24W (Recording mode with standard lens and LCD monitor in use)

Weight

Approx. 3.4kg (7.5 lbs.)
(Including KT14x4.4 lens, viewfinder, microphone)

Operating temperature

0℃ to 40℃ (32°F to 104°F)

Storage temperature

-20℃ to 60℃ (-4°F to 140°F)

Operating humidity

30% to 80% RH

Storage humidity

Under 85%

CAMERA

Image sensor

1/3" Progressive scan 3CCD

Lens

Canon F1.6, 14x, f=4.4-61.6mm (35mm conversion:32 to 448mm)

Lens mount

1/3" bayonet system

Filter diameter

82mm Hood Unit / 72mm Lens Barrel

Shutter speed

1/6 to 1/10000, EEI

Gain

0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, ALC

ND filter

OFF, +1/4 ND, +1/16 ND

Minimum illumination

1.25lx (typical) (1920x1080 mode, F1.4, +18dB, with 8-frame accumulation)

Synchronizing system

Internal sync: buit-in SSG

LCD display

4.3” LCD, 800 x 480 (WVGA, 410,000 pixels)

Viewfinder

0.45” LCOS, 1,226,000 pixels (852 x 480 x 3)

VIDEO / AUDIO

Recording media

SDHC memory card (Class 6 or Class 10), 2 slots

Video recording

Video codec: MPEG-2 Long GOP(HD), DV(SD)
File format Quicktime for Final Cut Pro(HD/SD)/mp4 file format(HD) Note*1/avi file format(SD)


HD Recording mode

HQ mode: VBR, 35Mbps (1920 x 1080i 60, p24/30) MPEG-2 MP@HL

SP mode: CBR, 25Mbps (1440 x 1080i/60) MPEG-2 MP@H-14;

SD Recording mode

DV compression 4:1:1, 8-bit, 25Mbps

Video Frame Rate

NTSC setting HD HQ mode:

1920x1080/59.94i, 29.97p, 23.98p, 1440x1080/59.94i (MOV only)

HD SP mode: 1440x1080/59.94i

NTSC SD mode: 480/59.94i

Audio recording

HD: Linear PCM 2ch, 48 kHz / 16 bit, SD: Linear PCM 2ch, 48 kHz / 16 bit

INTERFACE

Video output

Analog Composite output (downconverted 480i, 4:3/16:9): 1.0V (p-p), 75-ohms, BNC (unbalanced; switchable from analog component Y output)

Analog Component output (downconverted 480i; 1080i) : BNC x3 (unbalanced)

Y: 1.0V (p-p), 75-ohms Pb, & Pr: 0.7V (p-p) 75-ohms

SDI output (downconverted 480i/1080i: embedded audio) BNC (unbalanced)

HD-SDI: Compliant with SMPTE 292M / SD-SDI: Compliant with SMPTE 259M

Audio input

[MIC] -60 dBu, 3k-ohms, XLR (balanced), +48V output (phantom power supply)
[LINE] +4 dBu, 10k-ohms, XLR (balanced)

Audio output

-8±1 dBu (audio signal process output at +20 dB), 1k-ohms, RCA X 2 (unbalanced)

Headphone

φ3.5mm mini jack (stereo) x2

IEEE1394 output

4 pin

Remote connector

DIN 6 pin

USB

Mini USB-B type, USB2.0, mini B, slave function (mass storage class) only

PROVIDED ACCESSORIES

Microphone x1