DT-V9L5U

8.2-INCH BROADCAST STUDIO MONITOR

MSRP: $2,050.00

General

Model name

DT-V9L5

Type Multi format

LCD monitor

Screen size Type

8.2 wide format

Aspect ratio

16:10

Compliant video signal format

See below

Format

HD SDI: SMPTE292M


SD SDI: ITU-R BT.656, SMPTE259M


EMBEDDED AUDIO 16CH: SMPTE299M, SMPTE272M

Audio output

Internal speaker: 1.0 W

Operating conditions

Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)

Power requirements

AC 120 V / AC 220 V – 240 V, 50 Hz/60 Hz or DC 12 V – 17 V

Rated current

0.5 A (AC 120 V)
0.25 A (AC 220 V– 240 V)
1.3 A (DC 12 V - 17 V)
External dimensions
(excluding protruding parts)
with the stand without the stand
Width: 217 mm (8 5/8˝) Width: 217 mm (8 5/8˝)
Height: 218 mm (8 5/8˝) Height: 176 mm (7˝)
Depth: 185 mm (7 3/8˝) Depth: 116 mm (4 5/8˝)

Weight

3.2 kg (7.0 lbs) (with the stand)
2.3 kg (5.1 lbs) (without the stand)

Accessories

AC power cord x 1, Power cord holder x 1, Screw x 2 (for power cord holder), Protective filter x 1, Screw (for protective filter) x 4

LCD PANEL

Type

8.2˝ wide, active matrix TFT

Effective screen size

Width: 176.4 mm (7˝)
Height: 110.4 mm (4 3/8˝)
Diagonal: 208.3 mm (8 1/4˝)

Number of pixels displayed

1280 x 800

Number of colors displayed

16.70 million

Viewing angle (TYP.)

80° (Horizontally), 80° (Vertically)

Brightness (TYP.)

360 cd/m 2

Contrast ratio (TYP.)

800:1

INPUT/OUTPUT TERMINALS

VIDEO

Input/output of composite signal: 1 line, BNC connector x 2, 1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-connected
(auto termination).

HDMI

HDMI signal input (compatible with HDCP): HDMI connector x 1

COMPO.
(Y, Pb/B-Y, Pr/R-Y)
Analog Component signal input: 1 Line, BNC connector x3
Y: 1 V(p-p), 75 Ω(with sync)
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω
E. AUDIO HD/SD SDI (IN 1)
E. AUDIO HD/SD SDI (IN 2)
Digital signal input (compatible with EMBEDDED AUDIO signals):
auto detection, 2 line, BNC connector x 2
E. AUDIO HD/SD SDI
(SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1

AUDIO (IN)

Analog audio signal input: 1 line, RCA connector x 1, 500 mV (rms), high impedance

AUDIO (MONITOR OUT)

Analog audio signal output: 2 line, RCA connector x 2, 500 mV (rms)

REMOTE (MAKE/TRIGGER)

RJ-45, Make contact or momentary pulse to corresponding terminal

REMOTE (RS-232C)

D-SUB9, Serial communication