VN-A1U

NETWORK ENCODER

MSRP: $845.00
ARCHIVED
Direct Connection with Analog Camera to Digital Network
Equipped with one BNC video connector for connection of an analog video camera and another loop-through video output for connection to an analog monitor, the VN-A1U can be connected directly to an Ethernet network and deliver live video images. It's not only the simplest way to convert your existing CCTV surveillance system into a flexible computer-controlled remote monitoring system, it also allows you to use analog cameras and V.NETWORKS digital cameras in the same system.

Multi-Casting Capability
With the VN-A1U, camera monitoring is never restricted to a dedicated system or monitor. Multi-casting capability allows this versatile video server to deliver the same high-quality images to any and all computers on your network. There's virtually no frame rate degradation when the VN-A1U is accessed by multiple clients and network traffic management is easy and efficient.

Pre/Post Alarm Recording
Built-in alarm in/out terminals allow you to connect an infrared sensor or door alarm to automatically trigger alarm recording, while a 2MB memory is available for pre/post alarm image storage. This can be expanded up to 512MB when you use a removable Compact Flash memory card.

Motion Detection Function
Add an extra layer of security to your system with this convenient function. The Motion Detection function automatically indicates if any movement occurs in a specified area of the screen. You can specify the detection area and select the sensitivity level. The minimum area size is 8 x 8 pixels.

Firmware Update Via Network
Keeping your hardware up to date is easy via firmware updates on our website.

Other features

  • 10Base-T/100Base-TX interface
  • Pan/tilt/zoom control (RS-422/485, RS-232C)
  • 1-U rack mounting
  • Exclusive software provided