DLA-RS4000U

REFERENCE SERIES 4K HOME CINEMA PROJECTOR

MSRP: $175,000.00
ARCHIVED

Newly developed miniature ultra definition 4K2K D-ILA device
The DLA-RS4000 utilizes three newly developed ultra high resolution 1.27-inch D-ILA devices. Delivering more than 4 times the resolution of HD, these new devices were made possible by a new construction and production process enabling an approximate 43% area reduction while increasing the chip's pixel density. Using this process, JVC has produced a D-ILA chip with a 6.8μm pixel pitch and 0.25μm pixel gap with a high aperture ratio of more than 93%. With a total of 10 mega pixels (4096x2400 pixels), it is possible to create a four Full HD multi-screen window, or display 4x enlarged WUXGA images for high-end design and CAD applications.

10,000:1 high contrast ratio provides real black
The new Wire Grid polarizers adopted in the optical engine are an organic light reflection polarizing plate made from arrays of aluminum ribs with a width of a few tens of nanometers, aligned with a pitch of over hundred nanometers of the surface of a glass substrate. They have lower angle dependency for polarized light, effectively minimizing any leakage of light to the lens when the image is black. In addition, the projector employs technology to reduce disorder in orientation, new liquid crystals, and novel liquid crystal orientation that significantly cut out extraordinary light, such as scattered and diffracted light reflected from the liquid crystal. These technologies achieve a 20,000:1 device contrast ratio (approximately four times increase over previous 4K chips). The combination of the new engine and new devices deliver native 10,000:1 high-contrast images to the screen.

3500 Lumen light output
A new optical design featuring an 825W Xenon lamp generates 3500 lumens of light output and delivers excellent color rendering. Lamp power is adjustable in eight steps over the range from 825 to 660W.

Flexible installation
Vertical/ horizontal lens shift Horizontal lens shift (±25%) as well as vertical shift (±50%) permits more flexible layout. Inclined installation The projector chassis can be inclined up to a ±90° tilt angle.

Small, lightweight, and stackable design
The new projector chassis achieves approximately a 65% reduction in size compared to a conventional projector of the same class, and weighs 59kg (lens included). Moreover, the stackable design allows greater installation flexibility for applications such as 3D.

Compatible with AC100V-220V power source
The device operates with a universal 100V-220VAC Power Suppy and consumes less than 1.5kw of power.

User-friendly interface and excellent operability
The DLA-RS4000 incorporates DVI (Dual Link) x4 input terminals For maximum flexibility, a wide array of PC input resolutions are supported.

Network available
Besides a conventional RS232C interface, an Ethernet interface makes adjustment and installation from web browsers on PCs possible. Moreover, networking allows multiple projectors to be operated with a single PC. An e-mail function also enables sending out error messages and lamp replacement reminders.

Test patterns incorporated
Six built-in test patterns are incorporated — Color Bars, Color Cross, Hatch, Cross Hatch, Staircase, Ramp, and Flat.

Wide range of display options
Multi screen (single-, two-, and four screen modes)
Up to four screens with full-HD images and images with WUXGA resolution can be displayed simultaneously.

Connections in two/four screen mode
In these modes, signals from 2 or 4 PCs can be displayed simultaneously. (A change in display settings may be required depending on your graphics board.)

Note: The frame rate is converted to 60Hz regardless of synchronizing frequencies on the PC side.

Connections in single-screen mode
In single-screen mode, up to four signals from a single PC are displayed as a single image.

Note: The frame rate is converted to 60Hz regardless of synchronizing frequencies on the PC side.

Three types of gamma table incorporated
Three separate Gamma Tables are incorporated to allow for customization for different image sources and viewing environments.

Convergence adjustment function incorporated
Color registration of RGB panels in the optical system can be mechanically adjusted in 1/4 and 1/10 pixel increments.

Facebook Twitter LinkedIn Instagram YouTube