DT-V17G1Z

17-INCH 3G HDSDI/SDI STUDIO MONITOR

MSRP: $3,075.00
ARCHIVED

Type


Multi-format HDTV/SDTV LCD monitor

Screen Size


Type 17 wide format

Aspect Ratio


16:9

LCD Panel


17" wide, active matrix TFT

Effective Screen Size (W x H)


372.9 x 209.7. mm (14-11/16" x 8-1/4")

Pixels


1366 x 768 (W-XGA)

Display Colours


16.77 million

Viewing Angle

Horizontal

178°


Vertical

178°

Brightness


350 cd/m2

Contrast Ratio


900: 1

Response Time (G to G)


Rise time 8ms / Decay time 9ms (TYP)

Horizontal/Vertical

Horizontal

31.469 kHz to 75.000 kHz

Frequency (PC signals)

Vertical

48 Hz - 65 Hz



Depending on the signal within the range of these



frequencies, some signals may not be displayable in which case, "Out of range " is shown.

Applicable Standard


3G SDI (Ready) : SMPTE424M/SMPTE425M



DUAL LINK HD SDI (Ready) : SMPTE372M



HD SDI: BTA S-004C, SMPTE292M



SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525



EMBEDDED AUDIO: SMPTE299M, SMPTE272M

Audio Output


Internal:1.0 W + 1.0 W (L/R)

Environmental Conditions

Operating temperature

5°C to 35°C (41°F to 95°F)


Operating humidity

20% to 80% (non condensing)


Storage temperature

-20°C to 60°C (-4°F to 140°F)

Power Requirements


AC 120/220-240V, 50/60 Hz/DC 12 – 17 V

Rated Current


1.2 A (AC 120 V) / 0.8 A (AC 220 – 240 V)



5.0 A (DC 12 – 17 V)

Dimensions (WxHxD)
excluding protrusions)

With desktop stand

430 x 349.8 x 199 mm (17" x 13-7/8" x 7-7/8")

Without stand

430 x 309 x 102 mm (17" x 12-1/4" x 4-1/8")

Weight

Including stand

8.6 kg (18.9 lbs.)


Excluding stand

6.8 kg (15.0 lbs.)

Provided Accessories


AC power cord, power cord holder, screw x 2 ( for power cord holder), Ferrite core x 1 ( for external battery)




INPUT/OUTPUT TERMINALS

Video

HD/SD SDI (IN1)

Digital signal input (compatible with EMBEDDED AUDIO/

HD/SD SDI (IN2)

DUAL LINK): Auto detection, 2 line, BNC x 2

HD/SD SDI (OUT)

Digital signal output


(compatible with EMBEDDED AUDIO)


1 line (switched out), BNC connector x 1

DVI-D (HDCP)

DVI-D signal input (compatible with HDCP):


DVI-D connector x 1 (compatible with DDC2B)

COMPO.

Analogue component signal

(Y, PB/B-Y, PR/R-Y)

input/output: 1 line, BNC x 6


Video signal: Y: 1 V (p-p), 75 ohms,


PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 ohms


* The input (IN) and output (OUT) terminals are bridgeconnected


(auto termination)

VIDEO

Composite video signal input/output: 1 line,


BNC x 2, 1 V (p-p), 75 ohms


(IN and OUT are connected with a bridge connection)


(auto termination)

Audio

AUDIO IN

Analogue audio signal input:



1 line, RCA x 2, 500 mV (rms), high impedance


AUDIO MONITOR OUT

Analogue audio signal output: 1 line, RCA x 2, 500 mV (rms)

External Control

MAKE/TRIGGER

RJ-45 x1 (8-pin)


RS-485

RJ-45 x2 (IN/OUT)(8-pin)


RS-232C

D-sub(9-pin) x1