DT-V17G1Z

17-INCH 3G HDSDI/SDI STUDIO MONITOR

MSRP: $3,075.00
ARCHIVED
3G/Dual Link Ready
1080p uncompressed digital video data transmitted at a maximum rate of 60 frames per second at 3 GB/second can be input with one HD SDI Input. Dual Link is available through two HD SDI inputs.

IPS (In-Plane-Switching) LCD Panel


IPS panels provide wide viewing angles and excellent color reproduction. The crystal molecules move parallel to the panel plane instead of perpendicular to it reducing the amount of light scattering in the matrix. This results in minimal color change regardless of viewing position.

Digital and Analog Closed Captioning
EIA-608/708 DTV Closed Captioning is supported via HD-SDI inputs. Analog closed captions can also be monitored when signals are input via composite video connection.

Gamma Mode Preset
JVC offers various pre-set gamma modes (2.2, 2.35, 2.45, 2.6) to meet your application needs.

Vectorscope
High-quality vector scope allows simple checking of hue and saturation of digital video signals. Hue and saturation of color signal are detected and displayed as a vector with resolution of 254 x 254. Compatible with video,component, SDI (SD/HD), DVI (except PC signals) input signals, and offers a double-size display** option and selection of display position or translucence functions.
*Two display sizes cannot be displayed at the same time.
**The position is fixed for double-size display.

Waveform Monitor

Detects video, component (excepting RGB), SDI, DVI (except PC) brightness signals and displays them with resolution of 360 x 254 for SD signals or resolution of 480 x 254 for HD signals. Besides, it is possible to perform checks at the colour signal level of each colour per screen for R/G/B, Y/PB/PR, Y/CB/CR. Over-level function enables peak brightness to be checked at a glance. The display allows a double-size display** option, and selection of display position or translucence functions.

Note: Waveform and Vectorscope cannot be displayed simultaneously.


Advanced Audio Level Meter
The channel number is displayed in each level bar. And, you can check the status of the audio signal at a glance for Reference Level/Over Level 0 dB, three set levels, and peak hold function.