The industrial standard C-mount 1/3" 3-CCD color cameras shall be a JVC KY-F55BU or equivalent. The camera shall incorporate three 1/3" interline-transfer CCD pickup device with 380,000 (768 (H) x 494 (V)) effective pixels for separated R,G,B, and built-in F1.4 optical prism for accurate color separation with no optical distortions. The scanning system shall be 2:1 interlaced. The camera shall produce a horizontal resolution of 750 TV lines and a signal to noise ratio of 60dB for sharp, accurate and noise free picture. The camera shall feature an Automatic Gain Control circuit or selectable 0dB, ALC, EEI, ALC+EEI to provide clear images in various light conditions. The camera shall deliver a sharp color picture sensitivity of F5.6 at 2000 Lux. The camera shall feature Automatic Tracking White balance for accurate color reproduction or Manual individual color adjustment for flexible operation in a wide range of environments. The camera shall have user-friendly set up for adjustment of H. phase, SC coarse, EEI, and white balance. The camera synchronization shall be internal or external by Composite video or Black Burst signal. The camera will feature Automatic Electronic Shutter (AES) which is equivalent to continuous variable shutter speed between 1/60 to 1/2000 second and allows for the use of slow shutter mode. The camera will feature Variable Scan mode between 1/60.3 to 1/2074.6, Random Trigger, and color bar generator. The camera output signal shall be composite (BNC / 9-pin D-sub), Y/C, RGB, and Component by 9-pin D-sub connector. The camera shall feature optional remote control by wired or RS-232 that controls full function of camera. Power source shall be DC12V with lock-in din connector. The camera’s dimensions shall not exceed 2-9/16" H (without base) x 2-13/16" W x 5-1/4" D. The unit shall be UL listed.