site product dealer locator
consumer products | product registration | support | event calendar | newsroom |

JVC Support
Contact Information
Service Centers
Email Support
CDR Support Archive
E-Z Link Program
The Perfect Experience
Product & Firmware Updates
Bookmark This Page
Print This Page


Firmware

These firmware updates are for our various hardware products.  The JVC firmware updates are found on our FTP site.

Firmware updates for non-JVC hardware products are not on the JVC FTP site.

If you are not sure what firmware is, read below, for a general definition.

The chart below shows CD-Recorders by JVC Digital Storage Systems, along with the current firmwarerevision for that model drive:

CD-R Model Number Firmware Revision
JVC XR-W2001 Revision A * 235S
JVC XR-W2001 Revision B ** 2.35
JVC XR-W2010 and XR-W2012 1.51
JVC XR-W2020 and XR-W2022 2.05
JVC XR-W2040 1.12
JVC XR-W2042 1.12
JVC XR-W2080 (ATAPI) 2.06
JVC XR-W2082 (ATAPI) 2.06
Teac CD-R50S and CD-R55S Teac Support Site


* The XR-W2001 Revision A will not have aCD-R logo on the front bezel of the CD-Recorder.
** The XR-W2001 Revision B will have a CD-R logo on the front bezel of the CD-Recorder, located to the upper-left of the emergency eject pin-hole.
What is Firmware?
Firmware is programming that is inserted into programmable read-only memory (PROM), thus becoming a permanent part of a computing device. Firmware is created and tested like software (using microcode simulation).  When ready, it can be distributed like other software and, using a special user interface, installed in the programmable read-only memory by the user. Firmware is sometimes distributed for printers, modems, and other computer devices.



JVC Consumer |  JVC Worldwide |  Contact Us |  About JVC Terms & Conditions

Pro Camcorders
Security Cameras
System components
Studio Monitors
Field Monitors
Public Displays
Public Displays
Blu-ray/DVD
Analog Cameras
IP Cameras
Security Video Recorders
Reference Series
Data Projectors
Visualization Series