System Solution[VIEW]

Editing Recorder

BR-D80
(U:NTSC /E:PAL)

This shows U-model.

Features

High-quality 50 Mbps, 8-bit, 4:2:2 D-9 recording and playback
2-hour (124 minutes) recording time with DS-124 cassette
+-1/3 variable speed playback (field/frame selectable)
Jog/shuttle control
Analog I/O: Composite, Y/C, Component (Y, R-Y, B-Y)
SDI (option)
RS-422A standard assemble/insert editing and control with external editing controllers
Frame-by-frame recording and editing
Two independently editable 16-bit, 48 kHz PCM audio channels
Two cue audio tracks for precise audio editing
Adjustable record levels
Front panel TBC adjustment of system, SC and video phases
Remote TBC adjustment via 15-pin D-sub connector including video level, chroma phase, chroma level, and pedestal level
RS-232C serial port for diagnostics
LTC/VITC time code
Re-generation of external time code, or jam sync
Rugged die-cast chassis using ceramic tape guide rollers and sapphire flanges for long life
Center rotating head design for long head life

Optional accessories

Specifications

[GENERAL]

Format: D-9

Tape: 1/2-inch metal particle

Power requirement: AC 120 V, 60 Hz (BR-D80U)/AC 220 to 240 V, 50/60 Hz (BR-D80E)

Power consumption: 180 W

Dimensions (WHD): 429 x 188 x 567 mm (16-15/16" x 7-7/16" x 22-3/8")

Weight: Lighter than 23 kg (50.7 lbs.)

Temperature: Operating: 5 degrees C to 40 degrees C (41 degreesF to 104 degreesF)
Storage: -20 degrees C to 60 degrees C (-4 degreesF to 140 degreesF)

Humidity: 30% to 80%

Tape speed: 57.737 mm/s

Recording time: 124 minutes (using DS-124 tape)

Picture search: +-32 times with visible color picture (forward & reverse)

FF/REW time: Approx. 3 minutes (with DS-104 tape)

Slow motion: +-1/3 times with full picture quality (requires remote control)

Remote control: RS-422A

Remote diagnosis: Via RS-232C (list capabilities)

Rotation speed: 4500 rpm

Tracks: 2 audio cue, 1 control, 10 tracks video/audio per frame (NTSC), 12 tracks (PAL)

Track pitch: 20 um

Head drum: 62 mm (same as S-VHS)

[VIDEO]

Sampling: 4:2:2, 8-bit Y: 13.5 MHz R-Y/B-Y: 6.75 MHz

Compression: 3.3:1 DCT based intraframe coding

Data rate: 50 Mbps

Frequency response (SDI in, analog out): Y: 0 to 4.5 MHz, +1.0/-2.0 dB (analog out)
R-Y/B-Y: 0 to 2 MHz, +-1.0 dB

S/N (SDI in analog out): 55 dB

K factor: 2%

SDI I/O (unbalanced): Option

Analog I/O (75 ohms, unbalanced): Composite: 1 Vp-p
Y/C: Y: 1 Vp-p, C: 0.286 Vp-p (burst)
Component: Y: 1 Vp-p R-Y/B-Y: 0.7 Vp-p
Reference: 0.45 Vp-p (loop)

[VIDEO CONTROL ADJUSTMENT RANGE]

System sync phase: +-3 us or more

Subcarrier phase: 360 degrees or more

Video phase: +-1 us or more

Video level: +-3 dB or more (remote required)

Chroma level: +-3 dB or more (remote required)

Chroma phase: +-30 degrees or more (remote required)

Setup level: 0 mV or less to 100 mV or more (remote required)

[AUDIO]

System: 2 ch PCM, 48 kHz, 16-bit
Frequency response: 20 Hz to 20 kHz +1/-1.5 dB
Dynamic range: Less than 85 dB (at 1 kHz)
Distortion ratio: Less than 0.1% (1 kHz at operation level)
Crosstalk: Less than 75 dB (at 1 kHz)
Headroom: 20 dB
Emphasis: Automatically switching in play
Wow and flutter: Below measurable level
SDI I/O: Option
Analog input: Line: -6/+4 dB high impedance balanced
Analog output: Line: -6/+4 dB low impedance balanced
Monitor: -6 dB low impedance balanced
Headphones: Infinity to -17 dBs, 8 ohms