System Solution[VIEW]

Editing Recorder

BR-D95
Universal model (both NTSC/PAL)

This shows U-model.

Features

50 Mbps, 8-bit, 4:2:2 D-9 recording/playback
Universal power supply
525/625 playback/recording (switchable)
Variable motion in range of -1.1 to +1.1 (1%-step)
Fit and fill function from -0.9 to 1.1 (0.1%-step)
SDTI interface (option)
Viterbi circuit
Tiltable front panel editing control for recorder and player (swap editing)
Four independently editable 16-bit, 48 kHz PCM audio channels
Adjustable audio record levels
Audio video fade function
Optional serial digital video I/O with four channel embedded audio
Built-in pre-read for layering and two machine A/B roll
Built-in pre-read window with 32 lines and audio
Two-hour recording & playback time with DS-124 cassette
Full TBC control under front panel of system, SC and video phases, video level, chroma phase, chroma level, and pedestal level
Adjustable audio playback levels
Audible PCM sound in slow motion for precise editing
Jog/shuttle control
Optional SDI video output with four channel embedded audio
Analog I/O: Composite, component (Y, R-Y, B-Y)
Balanced 4 channel audio monitor output
Remote TBC adjustment via 15-pin D-sub connector
RS-422A standard control
RS-232C control and serial port for diagnostics
LTC time code with balanced I/O
Rugged die-cast chassis using ceramic tape guide rollers and sapphire flanges for long life
Center rotating head design for long head life

Optional accessories

Specifications

[GENERAL]

Format: D-9

Tape: 1/2-inch metal particle

Power requirement: AC 100 - 240 V, 50/60 Hz

Power consumption: 180 W

Dimensions (WHD): 429 x 188 x 567 mm (16-15/16" x 7-7/16" x 22-3/8")

Weight: Lighter than 25 kg (55.1 lbs.)

Temperature: Operating: 5 degrees C to 40 degrees C (41 degreesF to 104 degreesF)
Storage: -20 degrees C to 60 degrees C (-4 degreesF to 140 degreesF)

Humidity: 30% to 80%

Tape speed: 57.737 mm/s

Recording time: 124 minutes (using DS-124 tape)

Picture search: +-32 times with visible color picture (forward & reverse)

FF/REW time: Approx. 3 minutes (with DS-104 tape)

Slow motion: +-1/3 times with full picture quality (requires remote control)

Remote control: RS-422A/RS-232C

Remote diagnosis: Via RS-232C (list capabilities)

Rotation speed: 4500 rpm

Tracks: 2 audio cue, 1 control, 10 tracks video/audio per frame (NTSC),12 tracks (PAL)

Track pitch: 20 um

Head drum: 62 mm (same as S-VHS)

[VIDEO]

Sampling: 4:2:2, 8-bit Y: 13.5 MHz R-Y/B-Y: 6.75 MHz

Compression: 3.3:1 DCT based intraframe coding

Data rate: 50 Mbps

Frequency response (SDI in, analog out): Y: 0 to 5.75 MHz, +0.5/-2.0 dB (analog out)
R-Y/B-Y: 0 to 2 MHz, +-1.0 dB

S/N (SDI in analog out): 55 dB

K factor: 2%

Pre-read window: 32H

SDI I/O (unbalanced): Option w/embedded audio
SDI I/O Option

Analog I/O (75 ohms, unbalanced): Composite: 1 Vp-p
Component: Y: 1 Vp-p R-Y/B-Y: 0.7 Vp-p
Y/C: Not available
Component: Y: 1 Vp-p R-Y/B-Y: 0.7 Vp-p
Reference: 0.45 Vp-p (loop)

[VIDEO CONTROL ADJUSTMENT RANGE]

System sync phase: +-3 us or more

Subcarrier phase: 360 degrees or more

Video phase: +-1 us or more

Video level: +-3 dB or more

Chroma level: +-3 dB or more

Chroma phase: +-30 degrees or more

Setup level: 0 mV or less to 100 mV

[AUDIO]

System: 4 ch PCM, 48 kHz, 16-bit
Frequency response: 20 Hz to 20 kHz +1/-1.5 dB
Dynamic range: Less than 85 dB (at 1 kHz)
Distortion ratio: Less than 0.1% (1 kHz at operation level)
Crosstalk: Less than 75 dB (at 1 kHz)
Headroom: 20 dB
Emphasis: Automatically switching in play
Wow and flutter: Below measurable level
SDI I/O: Option (embedded)
Analog input: Line: -6/+4 dB high impedance balanced
Analog output: Line: -6/+4 dB low impedance balanced
Monitor: -6 dB low impedance balanced
Headphones: Infinity to -17 dBs, 8 ohms